GS-TRAQ

main content


How many bytes of data-traffic are sent for one waypoint of TR-102?
TR-102 sends a waypoint to TR Management Software is about 90 bytes (not include TCP protocol overhead)
TR-102 is set up for SMS only and with Handy Tracker software. It does not return a position request to the HandyTracker, but from the diagnostics log, it sends the report to itself
If you changed SIM card of the smart phone, please remember to change the phone number in the field of “Return num”
How many internal geo-fences can TR-151 simultaneously handle?
TR-151 can set up to 10 rectangular or circular boundaries. Please note the 10 geo-fence area setting of TR-151 must be “get in” or “get out”. You could not set “get in” and “get out” at the same time for the 10 geo-fence areas. Tracker will accept the last geo-fence area setting to work as “get in” or “get out” and send alarm when violate the geo-fence setting For example, you set the first geo-fence area as “get in” and the second as “get out”. Tracker will handle both areas as “get out”
How many bytes of data-traffic are sent for one waypoint of TR-151?
TR-151 sends a waypoint to GS-TRAQ free website is about 120~130 bytes (not include TCP protocol overhead) TR-151 sends a waypoint to TR Management Center Software is about 90 bytes (not include TCP protocol overhead)
TR-151 is registered at GS-TRAQ Free Web successfully. But, we do not see any position on the map of GS-TRAQ.
If report mode is set at stop report or ping report, TR-151 will not report to GS-TRAQ automatically. If you want tracker to continue report to GS-TRAQ, please set TR-151 at periodic report. Meanwhile, please also note that if the value of GPS fix is No Fix, the point will not be displayed on the map. Only 2D and 3D Fix data will be displayed.
How long is the data available in the TR Management Center database – until deleted or for a year?
It does not have time limit. You could save up to 400 million pieces of data in the database You could look up the history data by Query tool
I set TR-151 at GPRS ping report mode. After TR-151 sends report, all LEDs will be turn off in few minutes. Anything wrong?
After sending the GPRS ping report, TR-151 will turn off the LED for the purpose of power-saving and not make others find the tracker. TR-151 is a vehicle tracker. Turning off all LED when it is not tracking is for not making the other people to find that the vehicle or asset is installed with tracker. If you want the LED on all the time, you could set it to be GPRS periodic report mode with short interval.